HOWTO:Using Named Paths

From WireCAD Online Help
Jump to: navigation, search
Command Line Shortcut: Varied

User Permissions Level: All
Product Level: XLT PRO
Named Paths help you track cable lengths.




Attention.png Warning: This assumes version 6.1.0.1592 or better


Before You Start

This tool assumes that you have already calculated the cable path length. If you have a scaled floor plan consider tracing the path with a polyline from which you can measure length. Remember when using this method to add in the elevation traverses. Also, the unit of measure of the polyline length will be in DU which you must convert to your unit of measure.

Adding a Named Path

  1. Open the Named Paths Grid. Database>Named Paths Grid.
  2. Enter your path data.
    Namedpaths1.png
  3. Click File>Save to commit your changes.

Bulbgraph.png Note: Slop Factor should be expressed in decimal form

Using a Named Path While Adding a Cable Number

  1. Double click a cable (be sure that the Edit Cable Data on Assignment button is checked you you see the edit dialog).
    Namedpaths2.png
    Namedpaths3.png
  2. Click the Misc tab.
  3. Select your previously named path.

Length Calculation

The length field will be populated for you based on the following formula: ((2(ServiceLoop)) + Length)1 + SlopFactor


Using a Named Path in the Cables Database

  1. Open the Cables grid. Databases>Project Cables>Project Cables Grid.
    Namedpaths4.png
    Namedpaths5.png
    Namedpaths6.png
    Namedpaths7.png
  2. Edit the Named Path field. The length with update when you click out of the Named Path field.

Bulbgraph.png Note: The length field also updates automatically when Named Paths are copied.